Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterCable Repair in Yonkers, NY
Garage door cable repair in Yonkers typically runs $165 – $290 for a standard cable replacement, and most jobs are finished the same day. Cables are the steel wires that run along either side of your door and do the heavy lifting with your springs; when one snaps or frays, the door can jam, hang crooked, or slam down without warning. Marlow Garage Door Repair Yonkers fixes cables fast, gives you a written price before any work starts, and backs every repair with our 365-Day Done Right Promise. Call (845) 407-9237 any time – a real person answers, day or night.
This is a focused Garage Door Repair service, and it’s one we handle constantly across home garage doors in Westchester. Cables fail for predictable reasons: age, rust from Yonkers humidity off the Hudson, or a snapped spring that overloaded the line. When they go, you’ll know it.
When You Need Cable Repair
A frayed cable doesn’t always announce itself. Sometimes the door just feels heavy, or one side lifts slower than the other. Here are the signs we tell Yonkers homeowners to watch for:
- The door hangs uneven or crooked. One cable breaks or stretches, and the door tilts to one side. This is dangerous – the remaining cable is now carrying double the load.
- The door won’t open at all. You hear the opener running, but the door barely moves. A snapped cable means the opener is now pulling against dead weight, and the motor can burn out.
- You see a frayed wire. Walk to the side of the door and look at the cable near the bottom bracket. If you can see individual wire strands poking out, that cable is days from snapping. We see this regularly in older Northeast Yonkers and Getty Square homes with doors from the early 2000s.
- A loud bang followed by the door slamming shut. The cable snapped under tension. The door likely dropped hard. Keep the door closed and don’t try to force it open.
- The door opens a few inches, then stops. A kinked or off-track cable is binding against the drum at the top of the door.
- Visible rust on the cables. Near the Hudson River, salt air accelerates corrosion. Rusted cables are brittle and break under normal use – even on a door that works fine today.
One note on safety: garage door cables are under extreme tension. They work alongside torsion springs that can hold hundreds of pounds of stored force. If a cable has snapped or is showing frayed strands, do not attempt to remove or rewrap it yourself. A trained professional has the right tools and knows how to release the tension safely. If you’re seeing any of the signs above in Park Hill, Red Oak, or anywhere else in Yonkers, call (845) 407-9237 and we’ll send someone out.
Our Cable Repair Process
Here’s how a cable repair works with Marlow Garage Door Repair Yonkers – step by step, so you know exactly what to expect:
- Book online or call us. You can schedule in seconds from your phone, or call (845) 407-9237 and talk to a live person. Either way, you get a fixed arrival window with live tracking through The Relay Visibility Guarantee.
- Your tech arrives in uniform, background-checked. The technician inspects both cables, the drums, the bottom brackets, and the springs. We don’t patch one side and leave the other to fail next week.
- You get a written price before work starts. We quote the exact cost, in writing, for the cable replacement and any related parts. The number you agree to is the number on the invoice. No add-ons, no surprises.
- The repair gets done right. We replace both cables as a matched pair, confirm the drums are correctly aligned, and set the tension properly. If your door is a Wayne Dalton, LiftMaster, or Craftsman model, our techs are trained on that specific hardware.
- We test the full cycle and show you the results. The door gets cycled multiple times, the balance is checked, and before-and-after photos are included in your digital invoice. Pay from a link, right on your phone.
- You’re covered for a year. Every cable repair carries the 365-Day Done Right Promise. If the repair doesn’t hold, we come back for free. That’s in writing, not buried in fine print.
Cable Repair Pricing in Yonkers
Here’s what you can expect to pay for garage door cable work in the Yonkers market, based on the jobs we handle across the city – see our full How Much Does Garage Door Repair Cost? (2026 Price Guide) - Yonkers, NY for more details:
- Single cable replacement: $165 – $220 – includes the cable, labor, and alignment check.
- Both cables replaced (recommended): $250 – $290 – replacing both prevents the older cable from failing right after the new one goes in.
- Cable plus drum replacement: $220 – $310 – if a worn drum caused the cable to slip or chew itself apart.
- Cable plus bottom bracket replacement: $190 – $260 – brackets crack or warp over time, especially on Raynor and Craftsman doors.
- Full spring and cable replacement package: $350 – $520 – if the springs failed and took the cables with them. This is the most common combo we see in Yonkers.
What affects the price:
- Door height and weight: An 8-foot door on a two-car garage costs more than a standard 7-foot single door – longer, heavier-duty cables are required.
- Spring condition: If your springs are worn, new cables won’t last long. We’ll tell you honestly if a spring replacement makes more sense than patching cables alone.
- Drum and bracket wear: Sometimes the cable is the victim, not the cause. We check the whole system before quoting.
- Access: Tight or obstructed garages in older Yonkers homes can add a little time, but it’s rare.
You’ll get the exact written price before we touch anything. No estimate ranges that balloon at the door. Call (845) 407-9237 for a free estimate – we’ll tell you the number up front.
Why Yonkers Homeowners Choose Marlow for Cable Work
We’re not the only garage door repair near me in Yonkers, NY option. But we’re the only one built around a simple idea: you should know the price, know who’s coming, and know you’re covered before you ever open your garage. Marlow has been doing garage door repair since 2002, and every tech who shows up at your door is background-checked, uniformed, and trained on eight major brands – including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Jaylen Ross leads our Yonkers team, and the standard is the same on every job. The Relay Standard means live arrival tracking, a written price before work starts, before-and-after photos, and a digital invoice you can pay from a link. You don’t sit around waiting in a four-hour window. You watch your tech drive to you.
For Yonkers homeowners who want more background on the broader service, our Garage Door Repair in Yonkers page covers springs, openers, tracks, and full door replacements in more detail.
FAQs – Cable Repair
How much does garage door cable repair cost in Yonkers?
Garage door cable repair in Yonkers typically costs between $165 and $290, depending on whether you replace one cable or both and whether any related parts like drums or brackets need attention. If springs also need replacing, the combined cost can run $350 to $520. You’ll always get a written price before any work starts. Call (845) 407-9237 for an exact quote – estimates are free.
Can you fix a garage door cable the same day?
Yes, in most cases we can complete cable repair the same day in Yonkers. We stock standard cable lengths and drum sizes for the major brands we service, including Wayne Dalton and LiftMaster. Call (845) 407-9237 in the morning, and there’s a strong chance your door is working again before dinner.
Is it cheaper to replace just one cable?
It’s about $85 – $130 cheaper to replace a single cable than to do both at once. However, we generally recommend replacing both cables as a pair – if one has snapped or frayed, the other is usually in nearly identical condition and will fail soon after. Replacing both now avoids a second service call within months. We’ll give you both prices and let you decide.
Can I safely replace a garage door cable myself?
We strongly advise against it. Garage door cables work with torsion springs that are under hundreds of pounds of tension. A mistake can cause the spring to release violently and cause serious injury. Cable replacement requires proper winding bars, cable tensioning tools, and experience with spring systems. This is one repair that’s genuinely dangerous to attempt as a DIY project, so we recommend calling a trained professional at (845) 407-9237.
How do I know if it’s the cable or the spring that broke?
Look at the side of the door. If you see a loose, dangling wire, it’s the cable. If the door won’t lift and you see a gap in the horizontal spring above the door, it’s the spring. Very often, both fail together – a spring snaps first, releasing tension, and the cable whips loose or breaks under the door’s dropping weight, sometimes requiring panel replacement if the door is damaged. In Yonkers, we see this most often on doors older than 10 years. A quick inspection call at (845) 407-9237 will tell you exactly what’s wrong.
Are you available for emergency cable repairs in Yonkers?
Yes. A snapped cable often leaves the garage door jammed halfway up in a house on a hill in Navy Hill or a block off South Broadway, with a car trapped inside. We answer the phone 24/7 and can dispatch a tech to Yonkers quickly. Call (845) 407-9237 any time – a live person picks up.
Do you repair cables on all garage door brands?
We repair cables on every major brand, and our techs are specifically trained on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors. If your Yonkers home has a less common brand, we’ll still take a look – most cable systems are similar at the hardware level. Call (845) 407-9237 with your door brand and age if you’d like preliminary guidance before we arrive.
Book Cable Repair in Yonkers
A broken cable won’t fix itself, and every day it sits broken is a day your garage is either unusable or unsafe. Book online in under a minute, or call (845) 407-9237 now and talk to a real person who can schedule your cable repair with a live-tracked arrival window and a written price before any wrench turns. If the repair isn’t right, we make it right – free, for a full year. That’s the 365-Day Done Right Promise, and it applies to every cable repair we do in Yonkers.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Yonkers, serving Yonkers.