Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterNew Door Installation in Yonkers, NY
New door installation in Yonkers typically costs $1,100 to $3,400 installed, depending on door material, insulation level, and whether you’re replacing the opener at the same time. Most full replacements we do in Yonkers take four to six hours from start to finish, and you’ll have a written price locked in before we unload a single panel from the truck. Call (845) 407-9237 for a free, no-obligation estimate, or book online and see your tech’s live arrival time before they even leave the shop.
We’re Marlow Garage Door Repair Yonkers, and we handle everything from a single cracked panel to a complete teardown and Garage Door Installation on homes all over Westchester. Replacing a door isn’t a decision you make often, which is exactly why we name the price before any wrench turns, name the guarantee in writing, and explain what you’re paying for in plain English. Led by Jaylen Ross, our crew has installed doors from Wayne Dalton, Raynor, and LiftMaster on homes from Crestwood to East Yonkers since 2002.
When You Need New Door Installation
Sometimes the call is clear: the door is sagging, the panels are so dented the door won’t balance, or the springs snapped and took the top section with them. Other times, the math is less obvious. Here’s what we see most often on service calls across Yonkers:
- Your door is 15-plus years old and the repair tab is stacking up. If you’ve replaced springs twice in three years and the rollers sound like a box of rocks, a new door usually costs less than nursing the old one along.
- Rust and corrosion have compromised the door. Yonkers winters mean road salt and moisture find their way into every seam. Once rust eats through the bottom weather seal or the steel panels start bubbling, structural integrity is gone.
- You want an insulated door and your current one is single-layer steel. Attached garages in Yonkers leak heat straight through an uninsulated door. A polyurethane-core door isn’t just quieter; it changes what that garage does to your heating bill.
- The door is loud enough to wake the block. If a Wayne Dalton or Clopay door from the early 2000s still runs on metal rollers without nylon bearings, the noise is a warning sign as much as an annoyance.
- You’ve had a strike or hit. We get calls from McLean Avenue and Sprain Road where a car clipped the bottom panel. A bent section throws off the track alignment and the door starts binding mid-cycle.
- You’re selling and the current door is an eyesore. A fresh door is one of the highest-return curb appeal projects in Yonkers, especially on colonials and split-levels where the garage faces the street.
If you’re not sure whether repair or replacement makes more sense, we’ll tell you. But if it’s replacement you need, you’ll get a straight number before you commit to anything.
Our New Door Installation Process
We don’t do four-hour windows, and we don’t do a number that changes when the truck pulls up. Here’s how it works, start to finish:
- Book your appointment or call (845) 407-9237. You can book online in under a minute, or talk to a real person 24/7. Tell us what door you have now, the rough size, and what’s going on.
- Your tech arrives, you get a written price before any wrench turns. We inspect the existing door, track, and opener, then lock in a number on the spot. That number is what you pay, full stop.
- We walk you through your door options. The price changes based on material (steel vs. composite), insulation level, window inserts, and brand. We carry Wayne Dalton, Raynor, and LiftMaster, so we’ll show you what each one actually costs installed on your specific opening.
- We remove the old door, track, and hardware. The full teardown usually takes about an hour. We lay down a tarp and clean up as we go, so you’re not finding loose bolts in your driveway for a month.
- We install the new door, panels, track, springs, and weather seal. Every component gets torqued to spec. Springs are wound with a winding bar, not a guess. The door gets tested for balance at three positions: fully open, mid-travel, and a hand’s width from the floor.
- We run the door through 10 full cycles and walk you through the new hardware. You’ll get the opener remotes, the manual release instructions, and the 365-Day Done Right Promise in writing before we leave.
Because we’re part of the Relay Home Co. family, every new door installation also comes with The Relay Visibility Guarantee: you see a live arrival time you can track, you get before-and-after photos, the written price, and a digital invoice you can pay from a phone link. No surprises, no chasing a paper receipt.
New Door Installation Pricing in Yonkers
Here’s what new door installation realistically costs in Yonkers, based on what we install most weeks. These are total installed ranges, not just the cost of the door panel:
- Single-car steel door (non-insulated): $1,100 to $1,800 installed
- Single-car steel door (insulated): $1,500 to $2,600 installed
- Double-car steel door (insulated): $2,200 to $3,400 installed
- Premium composite or carriage-house door: $2,800 to $4,500 installed
- Opener replacement (if yours is end-of-life): $400 to $750 installed
- Haul-away and disposal of old door: included, not a line item
What moves the number? The biggest factors are the door size, whether it’s insulated, and whether the spring system needs to be upgraded to match the new door’s weight. A 16-by-7 LiftMaster-compatible double door costs more than a 9-by-7 single, and we’ll tell you exactly why when we quote it. Every estimate is free, written, and valid for a full year, so if you’re planning ahead, the number you get today is the number you get in March.
And here’s the thing about the Yonkers market specifically: older homes, especially in the neighborhoods off Yonkers Avenue and Central Park Avenue, often have nonstandard openings. If your current door is a custom size, the new panel may need to be ordered. We carry the most common sizes in stock, and for custom orders, we tell you the lead time before you pay a dollar.
Every door we install is covered by the 365-Day Done Right Promise. If the installation isn’t right, we come back and make it right, free, for a full year. Not because we hope you won’t call; because we assume you will if something’s off. Call (845) 407-9237 for your free estimate.
FAQs – New Door Installation
How long does garage door replacement take in Yonkers?
Most standard garage door replacements in Yonkers take four to six hours from arrival to final testing, including removal of the old door and hardware. If your opening is a nonstandard size and we need to order a custom door, the install itself is still the same half-day job once the door arrives. Call (845) 407-9237 and we’ll tell you based on your specific door size.
Is it cheaper to repair or replace my garage door?
Generally, if a repair costs more than 50 to 60 percent of a new door, replacement is the smarter long-term move. In Yonkers, that usually means if you’ve got multiple broken panels, a bent track, or springs that failed alongside panel damage, a new door often pencils out to less per year than continuing to patch an aging one. We’ll quote both and let you decide, no pressure either way.
Can you install a new garage door the same day?
In most cases, yes, if you’ve got a standard single or double opening and we have the door in stock, we can often install it the same day we arrive. Some custom sizes and premium door lines require ordering, and for those we’ll tell you the lead time upfront. Call (845) 407-9237 and we’ll tell you what’s possible for your opening today.
Do you handle garage door opener installation with a new door?
Yes, we install door openers at the same time as the new door whenever yours is outdated or undersized for the new door’s weight. The written price you get before work starts covers the full package: door, track, springs, weather seal, opener, remotes, and haul-away. We work on openers from LiftMaster and other major brands, so your new door and opener work together from day one. Call (845) 407-9237 for a free estimate.
Does a new garage door need new springs?
Yes, and we don’t give you the option to reuse old ones. Every new door installation includes new springs sized specifically for that door’s weight, because a mismatched spring is a safety hazard and a premature failure waiting to happen. The spring cost is baked into the installed price, not treated as an add-on surprise. Call (845) 407-9237 for the exact number on your door size.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Yonkers, serving Yonkers.